Motor Oil Quality Tester Jia Xun MO6001
17 cm portable size. Use optical probe. No need to take oil from outside, just put the probe into the oil dipstick to get the test result.
- Brand Name: JiaXun
- Electronic: No
|hose length||800mm||Type of detection||Engine oil|
|Currently unavailable: Chevrolet Cruze (LDE), Buick Inland (LDE), BYD F0/F3|
engine temperature above 60°C please do not test, please check the thermometer on the dashboard. Must be below 60°C to test. Check that the probe is clean before testing. Make sure the oil doesn’t pass the probe .
|2||Zero setting key|
|4||Select the type of oil|
|Probe diameter||5.3mm||Oil hole requirements||Diameter >6mm, bending <30°|
Accurate measurement results :Using optical principle to check oil condition, know the latest condition of your oil anytime, anywhere, convenient and easy .
Optical probe: no need to take oil, just put the probe into the oil gauge to get the test results
Hazards of oil deterioration
1,Reduce lubrication: Do not change oil in time, because The oil lubrication effect is reduced, which hinders the normal operation of the engine and increases the running wear.
2,The sealing effect is reduced: the proper viscosity of high quality oil can effectively block the gap between cylinder block and piston to prevent gas leakage. If the oil is not replaced for a long time, it will make the oil water sample and lose the sealing effect.
3,The cooling effect is reduced: the endothermic performance and thermal conductivity of oil are much higher than that of water, and if the oil deteriorates seriously, the heat dissipation function will be greatly reduced.
4,The cleaning effect is reduced: the friction between metal parts will produce debris, and the combustion will produce impurities such as carbon deposition. If the oil is not replaced for a long time, these impurities will be deposited between the parts of the engine, causing harm to the operation of the engine.
Step 1: Open the hood and find the oil gauge
Step 2: Long press the boot button for 2 seconds to turn on the good news oil detector
Step 3: Press the right (S) button to switch to the engine oil detection state
Step 4: Pull out the engine oil gauge and put the probe into the oil gauge hole
Step 5: Press the trigger button on the handle and wait 10 seconds for the machine to make a prompt Display test results
New oil shows a normal range of 30%-100%
If the result of the oil detector is below 30.0%, the detector will issue an alarm, indicating that you should replace it Engine oil
brake fluid tester
Please note: it no included battery. Please buy at your local store .Battery model is r6 aaa size battery
1. FedEx/DHL/UPS/TNT for samples or bulk goods;
2. By Air or by Sea for bulk goods, for FCL; Airport/Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
3-7 working days for samples; 7-30 working days for bulk goods.